LASERS

 

 

In this department, the metal blanks are prepared for pressing, or the finished parts are cut after pressing. The laser data is created at 3 programmer workstations, both for cutting and for welding, which can be carried out with or without wire on the 6kW TruLaser 7040 system made by Trumpf. We use the Trutops 800 offline software to program the laser. In this program, we also use the“device construction” option.

OUR TECHNIQUE

l-start

start-08

start-04

LASER MACHINERY

The following Trumpf lasers are in use:

3D laser

558A1330

Machine type:
TruLaser Cell 7040 6KW CO² laser with MBO

Machine data:
TruLaser Cell 7040 3D
Model year 2010 (at KBW since 2012)
6KW power Co2 laser
Travel path X=4000 mm Y=2000 mm Z=750 mm divisible into 2 machining zones
Processing optics Dynamic C02 cutting optics Focal length F155 CO2 cutting optics Focal length F240
Modular processing optics (MBO) Laser welding with and without wire feed
Cutting capacity St: up to 4 mm (N2) up to 16 mm (O²), Al: up to 6 mm, SS: up to 8mm

558A1311

Machine type:
TruLaser Cell 7040 4KW CO² laser

Machine data:
TruLaser Cell 7040 3D
Model year 2008
4KW power Co2 Laser
Travel path X=4000 mm Y=1500 mm Z=750 mm divisible into 2 machining zones
Processing optics Dynamic C02 cutting optics Focal length F155
Cutting capacity St: up to 4 mm, Al: up to 3 mm, SS: up to 4 mm
Cutting speeds 1 mm steel plate up to 12 m/min

558A1293

Machine type:
TruLaser Cell 7040 3KW FKL

Machine data:
TruLaser Cell 7040 3D
Model year 2015
3KW power SSL Solid-state laser (SSL)
Travel path X=4000 mm Y=2000 mm Z=750 mm
Processing optics Dynamic cutting optics Focal length F155
Cutting capacity St: up to 4 mm (N2) up to 14 mm (O2), Al: up to 4 mm (N²)
SS: up to 4 mm (N²), Cu: up to 3 mm (O²), CuZn: up to 3 mm (O²)
Cutting speeds 1 mm steel plate up to 30m/min

Options for TruLaser Cell 7040 6KW CO² laser:

558A1340

558A1345

Various laser heads for optimal machining of the workpiece
Dynamic C02 cutting optics Focal length F155 CO2 or focal lengthF240

558A1347

558A1357

Modular processing optics Laser welding with and without wire

Determination of the proper machine set up for welding

2D laser

558A1304

Machine type:
TruLaser 1030 2D

Machine data:
TruLaser 1030 2D
Model year 2015
3KW power SSL Solid-state laser (SSL)
Travel path X=3000 mm Y=1500 mm
Automatic pallet changer
Cutting capacity St: up to 16mm, Al: up to 6 mm, SS: bis 8 mm, Cu: up to 4 mm, CuZn: up to 4 mm
Cutting speeds 1 mm steel plate up to 30 m/min